products Posts

Radon Membrane

Radbar – Radon Gas Barrier 4M x 25M 300mu

Summary:
Radon Gas Barrier 4M x 25M will form an effective passive barrier against Radon gas penetration and has been designed to meet the needs and requirements of the BRE document, whilst needing no special skills for installation.
The homogeneous membrane is a blown extruded blend of virgin polymer HDPE and LDPE to maximise its resistance to the gas. This co-polymer blend also gives the product extraordinary strength and tear resistance, particularly when compared with ordinary DPM.

Full description:
Ultra Radon Barrier 4M x 25M will form an effective passive barrier against Radon gas penetration and has been designed to meet the needs and requirements of the BRE document, whilst needing no special skills for installation.
The homogeneous membrane is a blown extruded blend of virgin polymer HDPE and LDPE to maximise its resistance to the gas. This co-polymer blend also gives the product extraordinary strength and tear resistance, particularly when compared with ordinary DPM.
The film will also act as a proprietary damp-proof membrane, and is available in two thicknesses. The membrane has enormous integral strength and requires no reinforcement.
NSAI Agrement
Radbar Radon Gas Barrier.
IAB CERT No. 96/3267RADBAR

Radon Gas Sumps

Summary:
The Radon Sump and Cavity Gas Vent System is manufactured by a rotational moulding process from heavy duty polyethylene. The sump is constructed with a solid roof and base and is provided with 40mm diameter holes in the walls.
Spigots for 110mm pipe connections are provided at each end of the sump, but are blanked off with knock outs to allow choice of direction for extract pipe.
Dimensions:
460mm x460mm
150mm deep

Full description:

The Radon Sump and Cavity Gas Vent System is manufactured by a rotational moulding process from heavy duty polyethylene. The sump is constructed with a solid roof and base and is provided with 40mm diameter holes in the walls.
Spigots for 110mm pipe connections are provided at each end of the sump, but are blanked off with knock outs to allow choice of direction for extract pipe.
Sumps and vents should be stored in dry conditions below 60°C and protected from UV light.

RadonEYE

ftlab-radoneye-rd200-pic1Radon Eye RD200 is a small, low-cost radon detector for fast and accurate measurement of radon in indoor environments. It’s an excellent instrument for continuous, time-resolved and
integrating radon measurements in homes, at workplaces and in public buildings. Easy to operate
it can be used by everyone, the homeowner as well as the radon professional.
The Radon Eye records and stores measurement data in 1-hour cycles and its memory can hold data
of one year continuous operation. This radon detector provides users with detailed and precise
information about temporal radon fluctuations that are detected with fast response and in high resolution. These unique features make the Radon Eye a perfect tool for screening measurements and control measurements, for long-term
radon monitoring as well as for short-term tests, for the evaluation of radon remediation measures but also for a quick verification of ventilation effects, for radon dosimetry, experimental setups and many other applications.
ftlab-radoneye-rd200-pic3The bright OLED display of the Radon Eye provides
users with the quickest information about changing radon levels since the displayed 1-hour mean value
is updated every 10 minutes. The direct display further indicates the radon mean values of the last
day and month, the peak value and the elapsed measurement time. But, the Radon Eye can also be connected to smart phones and tablets via Bluetooth.
The cost-free app offers a clear graphic visualization of detailed measurement data, the export of data as well as the setting of the alarm level and additional parameters.

ftlab-radoneye-rd200-pic4RADON EYE MAIN FEATURES:
• Continuous, time resolved and fast measurement of indoor radon
•First accurate results available after 1 hour
•Graphic visualization of data with smart phones and tablets
• Measurement data stored as text-files (*.txt)
• Data can be exported to other applications like MS-Excel
• Easy to use, maintenance free, large memory
ftlab-radoneye-rd200-pic5
Technical Specifications:
• Detector: Pulsed Ionization-Chamber
• Measure: Rn-222 activity concentration
• Unit of Measure: Bq/m³
• Measurement Range: 1 – 3700 Bq/m3
• Sensitivity: 1,35 cpm/100 Bq/m3
• Accuracy of 1-hour measurement data: ±14% at 100 Bq/m³
±11% at 200 Bq/m³
±10% at 300 Bq/m³
• Display: OLED (2.4 x 1.3 cm)
ftlab-radoneye-rd200-pic6• Displayed Value: floating 1-hour mean value, updated every 10 minutes
• Data Recording: in 1-hour intervals
• Memory capacity: measurement data for 1 year continuous operation
• Communication: Bluetooth LE (Android/ iOS)
• Environmental Conditions: Temp.: 10-40 °C, Relative Humidity: <90 % • Power Supply: DC 12 Volt via mains adapter • Power Consumption: 65 mA • Dimension and Weight: diameter: 8 cm, height: 12 cm, weight: 240 g

Airthings Wave Plus – Smart Indoor Air Quality Monitor

wave-package-webProduct Overview
Prevent illness at home and in your office while increasing energy and good health with Airthings Wave Plus IAQ Monitor and Radon Detector. The Wave Plus is the first indoor air quality monitor with sensors that detect the presence of radon, as well as carbon dioxide plus total VOC’s, for the most complete monitoring system available.

Complete IAQ Analysis
Airthings Wave Plus incorporates 6 sensors which include those that detect the 3 most troubling pollutants contaminating your indoor air causing sickness, increased asthma and allergy symptoms, and even death.
• Radon: Found in all 50 states, this odorless, colorless gas is the 2nd leading cause of lung cancer, accounting for over 21,000 deaths annually.
• Carbon Dioxide: While the implications of increased CO2 on the planet are more widely known, the effects of increased levels in your home or office can be headaches, vertigo, double vision, and an inability to concentrate.
• TVOC’s: Total Volatile Organic Compounds come from common household items like cleaners, adhesives, fabrics, aerosols, and paint. These can include benzene, ethylene glycol, formaldehyde, methylene chloride, among others.
In addition, you also receive detailed views of temperature, humidity, and air pressure plus additional sensors for more analytics options.

A Complete View
Just a simple wave of your hand at the Wave Plus will let you know the general quality of your indoor air. You also have the option of receiving audio alerts when air quality is bad.
• Green: Indoor air quality is good
• Yellow: Warning that air quality is approaching recommended limits
• Red: Indicates a dangerous level that requires action
Because the Wave Plus includes online access to a personalized dashboard, you can see a real-time view of your indoor air quality in detail. Data is displayed numerically, as well as in graphic form. Track historical data, observe trends, and compare individual spaces in your home or office allowing you to take more specific steps to improve the IAQ in those areas.
Through the Airthings dashboard you will receive alerts when air quality is poor plus receive tips that enable you to reduce hazards to your IAQ, optimize ventilation, and save on energy costs. The dashboard is compatible with Airthings Wave so you can integrate multiple devices throughout your home or office. View individual sensor values and export raw data for further use.

Productive Workspaces
Research from JLL indicates that companies spend only 10% on rent and energy costs, while they invest 90% in employee salaries. Apply a 2% improvement in energy efficiency vs. a 2% improvement in productivity and compare $.06 to $6 in increased revenue per square foot.
The American Lung Association’s list of the effects of poor indoor air quality includes a reduced ability to concentrate, frequent headaches, increased allergy symptoms and respiratory illnesses like asthma. Optimizing indoor air quality in the work place has the potential to actually generate revenue with increased productivity and reduced employee absence due to illness.
When applied to a school environment, the potential for an increase in average attendance plus an improved ability to concentrate, along with other benefits, could result in an increase in student performance and learning. The potential long-term effects of this outcome are staggering.

Completely Connected
Not only do you have access via the internet and your computer, but you can download the free app on your smartphone or tablet. Whenever you are in range of your Wave Plus, you’ll immediately receive updated data on your smart device. In addition, your Wave Plus is integrated with Amazon Alexa and IFTTT so you can use voice commands to control your device.
For those who love a technically advanced home environment, IFTTT allows you to create or access useful protocols for your IAQ monitor to follow, plus integrate with third-party products.
Summary
The Airthings Wave Plus is the first indoor air quality monitor to include sensors that detect the presence of radon as well as CO2, VOC’s, temperature, humidity, and air pressure. Access all your data online or your smart device.

What Customers Love
• Radon Detection: No need to purchase a separate radon detector, plus monitor other IAQ factors at the same time.
• Connectivity: You can access detailed information via Wi-Fi, Bluetooth, and ITFFF.

What’s In The Box?
• Air Quality + Radon Detector

• Qty (2) AA Batteries

• Owner’s Manual

• Mounting Screw

Manufacturer’s Warranty
1-Year Limited Warranty

Manufacturer’s Literature
Owner’s Manual
Product Specification Sheet

The first battery-operated smart indoor air quality monitor with Radon detection, including sensors for temperature, air pressure, humidity, TVOCs, and CO 2.
. Highly Accurate Track levels over long periods for more accuracy than traditional methods
• Increase Overall Health Measuring your indoor air quality is an important step in preventing illness and increasing productivity, energy and good health
• More Sensors Gain full visibility with 6 sensors, including the 3 most serious indoor air pollutants
• Complete Control Enjoy a complete and detailed overview of the air quality in your spac
• Stunning Design Looks fantastic in a variety of living spaces
• Smart Integrations Works with Amazon Alexa and IFTTT
• Easy Installation

Airthings Wave – Smart Indoor Air Quality Monitor

Airthings Wave Smart Radon Detector with free app, battery operated, no lab fees, easy to use
airthingswave2
• Radon is the leading cause of lung cancer among non smokers and is found in every home

• Radon gas fluctuates daily and needs constant monitoring to minimize the health effects

• The Wave provides detailed information about radon, temperature and humidity on your smartphone or tablet

• Use the free app or wave in front of the detector for colour coded notifications

• Receive notifications for air quality, data updates and low battery power

Airthings Wave is an easy to set up digital radon detector. The Wave provides you with detailed information not only about the radon levels in your home, but also the current temperature and humidity levels.

Radon levels can be checked with or without a smart phone or tablet. The detector automatically calibrates to its environment, improving accuracy.

airthingswave3Use the free app to see radon levels and compare daily, weekly, monthly and yearly radon measurements. The app updates constantly when in range of the unit and notifies you when radon levels are high or when the battery levels are low.

You can wave your hand in front of the detector and get a current reading with easy to understand color codes: green (good), yellow (warning), red (danger). An audible alarm also alerts you to high radon levels.

The Wave is easy to install on the ceiling or a wall requiring only one screw. 2 AA batteries (included) will give you about 1.5 years of peace of mind.
• Provides detailed information about radon, temperature and humidity on your smartphone or tablet
• Use the free app or wave in front of the detector for Color coded notifications
• Installing Wave onto a wall or ceiling is optional

airthingswave4Product Overview
Wave is the new smart radon detector from Airthings for your home or office that works with or without a smartphone. In addition, Wave also measures temperature and humidity using built-in sensors, thus increasing the accuracy of radon readings.

Simple Accuracy
Easy to install on a wall or ceiling with a single screw, Wave uses magnets to stay connected to the base. Two included standard AA batteries are all that is needed for operation so you don’t have to worry about complicated wiring or confusing instructions.
Wave gives you first results in only 1 hour and unlike a test kit, its detectors are unaffected by humidity and other radiation. After 7 days, 1 standard deviation is within 20% of the actual radon level and at 1 month it is within 10% for Radon levels measured at 100 Bq/m3.

airthingswave5App for Smartphone or Tablet
Wave’s free app for iOS (9.0 or later) or Android (5.0 or later) is easy to download from the AppStore or Google Play. Create an account and follow instructions for quick set-up. Airthings provides online support should any problem or questions arise.
With your Bluetooth enabled, every time you move within 30-50 feet of Wave, the latest data will be downloaded automatically and you’ll be notified if you need to take action either through your app or via email. The central image is the risk indicator, shown as a colored ring on your phone or tablet, with the numeric radon level average over the pre-selected time interval.
An extensive menu allows you to see graphs for radon, temperature, and humidity or see historical and average value graphs over a range of time intervals. Wave will use the national recommended level for your exact location as a basis for warning notifications and tracks data for 1 full year.

airthingswave6Instant Assessment
Even if you don’t use a smartphone, Wave lets you know your radon level with a simple wave of your hand in front of the unit. One of 3 universal color codes will appear as a light ring on this device, making it easy to see, even in the dark.
• Green: Good—Air quality is good, radon is low.
• Yellow: Warning—Air quality could be better, open a window.
• Red: Danger—Air quality is not good, radon levels are high.
You can also receive an audio alert from your detector when radon levels are above those recommended for your location or by the World Health Organization (WHO).

Device Features:
• Air quality sensors: Airthings’ Wave includes temperature and humidity sensors that provide the ultimate accuracy in radon readings by taking into account environmental factors. They also allow for early detection and notifications of potential mold concerns.
• App-connectivity: Real-time status is accessible with the app, which connects via Bluetooth and catalogues short- and long-term data for a one-year period, at daily, weekly, monthly and annual increments.
• Bluetooth technology: Bluetooth technology allows for seamless and automatic updates of sensor data. As long as you have the app installed and are regularly within 50 feet of the device, you will be notified if actions are needed.
• Notifications: When Wave detects high radon levels for a period exceeding national guidelines, you will be notified and receive recommendations on how to reduce radon in your home.
• Proximity detection: Close-range motion in front of the device activates a simple visual indicator light, which turns green (Good), yellow (Warning) or red (Danger) to alert you to your home’s air quality. An Audio Alert option provides an audible warning of high radon levels.
Summary
Wave Radon Detector from Airthings provides you with radon level readings available on your smartphone or tablet, or via email. Accurate and simple to operate, Wave stores data for a full year and provides visual and audible notifications of high radon levels along with suggestions for effectively addressing them.

airthingswave7What Customers Love:
• Bluetooth Enabled: Provides ongoing radon level information and tracking ability. Even if you don’t have a smartphone or tablet, you can receive the same information right to your inbox.
• More than Radon: Wave also monitors temperature and humidity, giving you more information while aiding accuracy of radon detection.

A smarter radon detector – monitor radon, as well as temperature and humidity quickly and accurately on your smartphone
• Highly accurate Track levels over long periods for more accuracy than traditional methods
• Meaningful Data View sensor data in a way that makes sense to you – 2 day, 1 week, 1 month or 1 year
• Stunning Design Looks fantastic in a variety of living spaces
• No Lab Fees Take control of your radon levels with no lab tests needed, ever!
• Smart Integrations Works with Amazon Alexa and IFTTT
• Easy Installation

AirthingsCorentium Home – Electronic Radon Gas Monitor

Air Things Monitor Summary:

The Air Things radon monitor is a pocket-sized electronic radon monitor that has an LCD display showing short term readings:  Ideal for use in homes, the Air Things is an affordable way of monitoring radon levels to ensure a healthy home environment. The device displays the average radon level over the last 24 hours, 7 days and 365 days.

The Air Things digital monitor are extremely accurate (±5%) and are produced and designed in Europe. Its LCD screen display is powered by x3 AAA batteries and is simple to use as it takes measurements from one room to another in order to get a reading of the radon concentrations in your home. Simply insert the batteries to start measuring radon levels.

Radon monitors can give users an early indication of whether a room or building is above or below regulatory thresholds and determine quickly if radon remediation is necessary.  As readings are continuously displayed there is no need to wait for results to be analysed at our laboratory.

Electronic radon monitors are usually recommended for obtaining short-term snap-shots of radon levels to assist in radon monitoring and remediation, both before and after radon measures have been fitted.
The Air Things monitors are not affected by dust or humidity and allow you to take the average daily, weekly and long term concentrations of radon levels in your home. Monitors can be placed wherever it is required with no cables needed.

The device should be left in place for at least 7 days before the first reading can be taken as definitive. During these 7 days, the monitor will be carrying out various readings using complex and refined algorithms. The longer the devices is left in place, the more accurate the long-term reading will become.
If you wish to move the device to a different room or property, there is a reset button to restart monitoring.

Specification

Radon Measurement range: 0 Bq/m3 to 9999 Bq/m3
Item Dimensions: 120mm x 69mm x 22.5mm
Item Weight: 130g (inc. batteries)
Battery supply: 3 x AAA (Average Battery Life: 3 years)
Operating Temperature: 0oC to 40oC+
Operating Environment: < 95% Relative Humidity

‘Simple to use, highly accurate and wildly popular portable Radon detector’
Portable Small and battery operated, with a 2 year battery life
Accurate Track levels over long periods, allowing for more accuracy than traditional methods
Quick Results You’ll see the first indications of your radon levels withing 24 hours
No Lab Fees Save money with no lab tests needed, ever!

If you have a number of properties and wish to place a larger order, please contact us and we will advise if a portfolio discount is available to you.

Radon Screening Test –Kit includes: x1 Single Detector

Choose from our 10-Day or 3 month Radon Screening Detector:
This is a single radon detector that can be ordered if you require extra detectors to add to your order perhaps if you have a larger than average size home, or a basement or extension in your home. This single radon detector will allow for testing in multiple areas of a building, so that further areas can be tested.
Kit includes :
Contains: One passive radon detector, to be placed in the home for 10 days (or longer)
Instructions on where and how to place detectors
Return slip and prepaid return envelope.
Laboratory analysis

We recommend this kit if it becomes necessary to purchase additional detectors so that further detectors can be placed in your home and additional areas can be tested.
Validated by Public Health England our radon detectors are analysed at an independent, third-party laboratory. Your report is despatched within 10- 14 working days of us receiving the detectors but are often be available sooner than this.

If you have an enquiry or a property portfolio that you wish to be tested for radon and wish to place an order over the phone – please  contact us.

Radon Screening Test –Kit includes: Two Detectors

10-Day or 3 month measurement Radon Screening Kit containing 2 radon detectors. Includes: laboratory analysis, instructions, return slip and stamped return envelope.

Note, results are returned electronically.

Our detectors are PHE validated and include instructions on where and how to place the detectors in your home and are to be left in place for 10 days or longer. 10 day detectors are Ideal for use in property transactions when a quick indicative result is required Detectors will be posted on receipt of your order.

Our single-use passive detectors are simply left in place, usually one in the living room and one in the bedroom before being posted back for laboratory analysis. Our third-party laboratory is validated by Public Health England and radon detectors are analysed and results / reports are emailed to you.

All prices shown include VAT at the standard rate. If you would prefer to place your order by telephone, please call us on 0800 9788435.  We currently operate delivery in the UK only

(Usually allow up to 3 working days to receive your test kits.)

Kit includes:

Contains: Two passive radon detectors, to be placed in the home for 10 days (or longer)
Instructions on where and how to place detectors
Return slip and prepaid return envelope.
Laboratory analysis

We recommend this kit for use in most average-sized homes. If your property is bigger than the average sized home, or has a basement or been extended, it may be necessary to purchase additional detectors so that further detectors can be placed and other areas can be tested.

Validated by Public Health England our radon detectors are analysed at an independent, third-party laboratory. Your report is despatched within 10- 14 working days of us receiving the detectors but are often be available sooner than this.

If you have an enquiry or a property portfolio that you wish to be tested for radon and wish to place an order over the phone – please contact us.